Cart is empty
Inverted Rotor Spray - Description
- Inverted Roto Spray™ from Antelco
- For Over the Top Watering
- Qty: 10 Pack
- Type: In Line
- 'C' Frame Design Gives Added Strength & High Distribution
- Full Flow Flipper Suspended Between Two Bearings for Reliable Performance
- Special Khaki Coloured Flipper with Dust Cover to Protect Baring
- Inverted Roto Spray™ Specification
- Flow Pattern: 360°
- Flow Rate: 85 LPH
- Diameter of Spray: From 4.4 - 7.2m
- Coverage: Up to 40m2 Depending on Water Pressure & Height of Sprayer
- Spray & Coverage is Based on Water Pressure of 100 kPa
- Works with 16mm Irrigation Pipe
- Manufacturer: Antelco
Inverted Rotor Spray - Uses
- Ideal for over head watering
- Commonly used in greenhouses & nurseries
Inverted Rotor Spray - Setup of Greenhouse Irrigation System
- Layout out a grid of 16mm irrigation pipes of the top of your greenhouse plants
- Secure the 16mm pipes in place - this can be done with cable ties
- Choose where you wish to include the inverted sprinklers
- Punch holes in the 16mm irrigation pipe with a hole punch
- Take a short length of 4mm feed line & push threaded end of rotor spray in
- Using a 4mm straight connector - contect the rotor spray to the 16mm irrigation pipe
Inverted Rotor Spray - Advantages
- UV stabilised for a longer life
- Same threading as our vari-jets, so heads are interchangeable
- Fine water spray from sprinkler mimics rain fall
- This system works with our water butt & water butt pump
- Can also work with solar/battery powered watering timer with addition of hose adaptor
No posts found
